From flooring to wall and ceiling applications, wainscot, bead board and siding, solid wood tongue and grooved planks offer natural and affordable beauty to any decorating style.  For the most part, pattern choices are purely aesthetic and do not affect the wear, function or cost of the product. Custom thicknesses are available and quoted on request.

1-3/8" and 1-3/4" thick planks are used for our batten door stock and for exposed loft installations; providing a finished ceiling below and plank wood floor surface above, all in a single product.

Flooring installations use either the square edge or eased edge.  As implied, the eased edge has a micro bevel, which gently accentuates each plank. An eased edge is required with all pre-finished products. 

The square edge treatment meets perfectly flush on the surface, gently blending the individual planks. The square edge also eliminates the very small but potential dirt and debris catch that can occur with the eased edge.

Siding, ceilings and walls adapt well to any T&G pattern. Vee Groove and Beaded are excellent traditional choices, as is the Eased Edge for a more subtle look or the Pickwick for that classic country feel.  Tongue and groove paneling can be used as a wainscot, installed floor to ceiling, vertically, horizontally, diagonally or in patterns. The choices are truly unlimited.

 Important Note: 3/8" thick bead board is suitable for wainscot or paneling installed over a solid surface.  Exterior T&G siding applications should be installed vertically in order to properly shed water.